Beylikdüzü Game Console Repair Center
On PlayStation 5, PlayStation 4, Xbox Series X/S and Nintendo Switch consoles 4K 120Hz HDMI 2.1 portVertical application liquid metal corrosion cleaning, BLOD/WLOD blue light, APU reballing and DualSense Hall Effect analog drift repair.
PS5 Liquid Metal & Cooling Overhaul
We perform factory-standard liquid metal resurfacing and sealing barrier insulation for liquid metal leakage due to vertical use, oxidation (dry spots) on APU surfaces, and overheating shutdowns.
- High conductivity industrial liquid metal
- Nickel-plated block and APU corrosion cleaning
- Fan speed and dB sound test under load.
HDMI 2.1 Socket & Video Integrated Circuit
HDMI ports broken due to physical force and burned out due to overcurrent. Panasonic MN864729 / MN864739 And Xbox Retimer (NB7N621M) The chips are repaired using microscopic soldering.
- Original HDMI socket with 4K 120Hz / VRR support.
- Restoration of damaged PCB data bus (pad)
- 100% pin contact check under microscope.
BLOD / WLOD Light Fault & BGA Repair
Syscon log diagnostics, APU reballing, and power MOSFET repair are applied to address issues such as the blue light turning on and off after 2 seconds (BLOD) on PS5 and PS4, no image on white light (WLOD), and Xbox not turning on.
- Controlled thermal profile with BGA rework station.
- 12V main power supply and standby line analysis
- Syscon UART error code reading and spot diagnosis.
Nintendo Switch (OLED / V2 / Lite) Service
On Switch consoles that won't turn on, charge, or display an image on a TV while in dock mode M92T36 PMIC, BQ24193 charging IC, PI3USB video controller and Type-C port repair is performed.
- Type-C double row pin microscope soldering
- Replacement of short circuit protection filters.
- Touchscreen and Joy-Con rail repair.
DualSense & Xbox Hall Effect Arm Repair
Self-driving and analog drift problems have made potentiometer wear a thing of the past. Magnetic Hall Effect / TMR Analog Module We perform assembly and software centering calibration.
- Zero drift for life thanks to magnetic Hall Effect sensor.
- R2/L2 adaptive trigger spring and microswitch replacement.
- Circularity verification in gamepad testing software.
Optical Drive (Blu-ray) & SSD Upgrade
If the game disc cannot be inserted, read, or remains in Safe Mode, the optical laser lens, drive motors, and internal Gen4 M.2 NVMe SSD are installed.
- Laser lens and mechanism gear replacement.
- PS5 Gen4 NVMe SSD heatsink mount
- Secure system setup without data loss.
Our Laboratory Diagnostic Procedure Specifically for Console Models
Each console ecosystem has a different power architecture, thermal interface, and integrated circuit layout. In our lab, processes are broken down according to the model:
Sony PlayStation 5 & PS4
Syscon diagnostic tests are applied to PS5 Fat, Slim, and Pro models for vertical use liquid metal oxidation, Panasonic HDMI encoder, and BLOD blue light.
Microsoft Xbox Series
In Series X and S models, repairs are performed on the 4K Retimer chip, internal power supply lines, fan noise, and optical drive synchronization.
Nintendo Switch & DualSense
For Switch OLED/Lite models, M92T36 charging PMIC repair and wear-resistant magnetic Hall Effect analog module mounting and calibration for the tonearms are provided.
Console Fault Decomposition Table
The same symptom can be caused by different pieces of equipment. The initial control steps performed in our laboratory are listed below.
| Observed Symptom | Possible Hardware Source | Laboratory Diagnostic Method | The implemented solution |
|---|---|---|---|
| "No Signal" on TV | HDMI Socket, Panasonic Encoder or Filters | Microscope pin inspection & oscilloscope signal testing | HDMI Socket / Chip Replacement |
| Blue Light Flashing (BLOD) | APU Solder Fracture, Southbridge, 12V MOSFET | Syscon error code reading & power line multimeter measurement | APU Reballing / Power Restoration |
| The fan is running too fast and shutting off in the game. | Liquid Metal Drying, Clogged Radiator, Fan Motor | Thermal camera analysis & temperature monitoring under load | Liquid Metal / Thermal Revision |
| The console is not receiving any power (no beep sound). | Internal Power Supply (PSU), Input Fuse, Standby IC | PSU output voltage & motherboard short circuit detection. | PSU Overhaul / Integrated Circuit Replacement |
| Nintendo Switch Not Charging / Not Turning On | M92T36 PMIC, BQ24193, USB-C Port Short Circuit | Input current measurement (5V/15V agreement check) | PMIC & Type-C Repair |
| The character is moving on its own (drifting). | Analog Potentiometer Carbon Layer Wear | Centering and angle testing in gamepad testing software. | Hall Effect Magnetic Analog |
Saved Games and Data Security
During console motherboard repair and thermal revision processes, your internal storage units (SSD/HDD) will not be formatted. Your saved games (save files), user profiles, and uploaded digital content are fully protected.
Your consent will only be requested before formatting devices where the operating system has crashed or the storage unit has physically failed.
Paradise AVM Delivery & Cargo Acceptance
You can deliver your device in person to our laboratory at Beylikdüzü Paradise AVM Ground Floor No:16 Shop:10 without an appointment and follow the fault diagnosis process firsthand.
For orders from outside Istanbul or from distant districts, protective packaging will be used. with our agreed shipping code You can safely deliver it to our service.
Frequently Asked Questions About Game Console Repair
The most frequently asked technical and operational details before service.
Could using the PS5 vertically cause liquid metal leakage?
In devices where the factory-installed APU insulation foam has deformed, vertical use can cause the liquid metal to seep downwards, creating dry spots and leading to overheating. In our service center, the liquid metal is homogeneously renewed, strengthening the sealing barrier.
How long does it take to replace an HDMI port?
We continuously stock genuine 4K 120Hz HDMI ports compatible with PlayStation 5, PS4, and Xbox series. Orders are usually completed the same day or within 24 hours.
Does the DualSense Hall Effect pickup-to-analog conversion completely solve the drift issue?
Yes. Replacing the carbon friction potentiometers in standard tonearms with magnetic field-operated Hall Effect sensors eliminates mechanical wear and permanently solves the analog drift problem.
What is the repair success rate for a BLOD (Blue Light) fault?
If the device has not been previously tampered with using an uncontrolled heat gun, professional APU reballing and power stage repair performed on a BGA rework station achieves a very high success rate.
Is a warranty provided for console repairs?
Yes. Original components replaced and motherboard/BGA repairs performed by KTeknik Servis are covered under service warranty.
Is your console not displaying anything or is it shutting down?
By providing our technicians with the make, model, and description of the fault of your PlayStation, Xbox, or Nintendo Switch via WhatsApp, you can receive an immediate preliminary assessment and estimated cost.